User Guide


23
3.4.3.2. Network Settings
On the device, go to More - Settings - More - Network.
DHCP: Tick the DHCP option to configure the network as DHCP
mode, and then IT83X will obtain the IP address, and other network
parameters automatically.
Static IP: Fill in the parameters of LAN IP, subnet mask, gateway,
pri DNS server and sec DNS server manually.
On the web portal, go to Network - Basic to configure the network
settings.
Figure 3.4.3.2-1 Wire network setting
Figure 3.4.3.2-2 Wire network setting