User Guide


46
Go to Phone-Relayto setup the DTMF code of local relay in
website.Users can press the Unlock key during the call.
Relay Delay: To set the delay time for local relay.
Status: To enable or disable the softkey in talking page.
Display Name: To modify the display name of unlock icons in
talking page.
Relay: To set the relay type, including local relay 1/2, remote relay
HTTP and remote relay DTMF.
3.8.3. Remote relay
IT83X can use the unlock key during the call to open the door in
doorphone’s site. Users need to setup the same DTMF code in the
door phone and indoor monitor.
Remote Relay: To set DTMF code for remote relay, which is “#” by
default.
Figure3.8.2-2 Relay display
Figure3.8.3-1 Remote relay setting
Figure3.8.4-1 Reboot