Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Introduction to Configuration Menu
- 4.Access the Device
- 5.Language and Time Setting
- 6.LED Setting
- 7.Volume and Tone Configuration
- 8.Network Setting
- 9.Intercom Call Configuration
- 10.Audio& Video Codec Configuration for SIP Calls
- 11.Access White List Configuration
- 12.Relay Setting
- 13.Door Access Schedule Management
- 14.Door Unlock Configuration
- 15.Security
- 16.Monitor and Image
- 17.Logs
- 18.Debug
- 19.Firmware Upgrade
- 20.Backup
- 21.Auto-provisioning via Configuration File
- 22.Integration with Third Party Device
- 23.Password Modification
- 24.System Reboot&Reset
- 25.Abbreviations
- 26.FAQ
- 27.Contact us
Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
66
16.3.ONVIF
Real-time video from the door phone camera can be searched and obtained
by the Akuvox indoor monitor or by the third party devices such as NVR
(Network Video Recorder) you can configure the ONVIF function on the web
Intercom > ONVIF interface so that other device will be able to see the video
from the door phone.
Parameter Set-up:
Discoverable: tick the check box to enable the Discoverable ONVIF mode.
If you select “ Discoverable” then the video from the door phone camera
can be searched by other devices.
User Name: enter the user name. The user name is “ admin” by default.
Password: enter the password. The password is “ admin” by default.
After the setting is complete, you can enter the ONVIF URL on the third party
device to view the video stream.
For example: http://IP address:80/onvif/device_service
Note:
Fill in the specific IP address of the door phone in the URL.