Product Info
Table Of Contents
- Product Overview
- Change Log
- Model Specification
- Introduction to Configuration Menu
- Access the Device
- Language and Time Setting
- LED Setting
- Volume and Tone Configuration
- Network Setting
- Intercom Call Configuration
- Audio& Video Codec Configuration for SIP Calls
- Access White List Configuration
- Relay Setting
- Door Access Schedule Management
- Door Unlock Configuration
- Security
- Monitor and Image
- Logs
- Debug
- Firmware Upgrade
- Backup
- Auto-provisioning via Configuration File
- Integration with Third Party Device
- Password Modification
- System Reboot&Reset
- Abbreviations
- FAQ
- Contact us
Single TenantDoor Phone
AKUVOX SMART INTERCOMwww.akuvox.com 88
16. Security
16.1. Tamper Alarm Setting
Tamper alarm function serves as a protection against any unauthorized
removal of the devices by triggering off the temper alarm while sending out
calls to the designated location. Tamper alarm will be triggered off when the
door phone changes its gravity value as opposed to its original gravity value
set up when the device is installed. You can navigate to Security > Basic >
Temper Alarm.
Parameter Set-up:
Tamper Alarm: enable the anti-theft alarm function.
Gravity sensor Threshold: set the threshold for the gravity sensory
sensitivity. The lower the value is, the higher the value will be. The gravity
sensor value is 32 by default.