Product Info
Table Of Contents
- Product Overview
- Change Log
- Model Specification
- Introduction to Configuration Menu
- Access the Device
- Language and Time Setting
- LED Setting
- Volume and Tone Configuration
- Network Setting
- Intercom Call Configuration
- Audio& Video Codec Configuration for SIP Calls
- Access White List Configuration
- Relay Setting
- Door Access Schedule Management
- Door Unlock Configuration
- Security
- Monitor and Image
- Logs
- Debug
- Firmware Upgrade
- Backup
- Auto-provisioning via Configuration File
- Integration with Third Party Device
- Password Modification
- System Reboot&Reset
- Abbreviations
- FAQ
- Contact us
Single TenantDoor Phone
AKUVOX SMART INTERCOMwww.akuvox.com 92
When the picture changes, if someone walks by, the lens is moved, the
number obtained by the calculation and comparison result will exceed the
threshold and indicate that the system can the corresponding processing is
made automatically.
16.3.1. Configure Motion Detection
You can turn on the motion detection and set up the motion detection interval
on the device. Path:Intercom > Motion > Motion Detection Options.
Parameter Set-up:
Suspicious Moving Object Detection:select “disable” to disable the motion
detection. Select “IR detection” to enable the IR sensor based motion