Product Info

Single TenantDoor Phone
AKUVOX SMART INTERCOMwww.akuvox.com 93
detection for the suspicious moving objects. And select “ Video detection”
to enable the video-based motion detection during the monitoring for the
suspicious moving object.
 Time Interval: set the time interval for the motion detection. If you set the
default time interval as “10”Sec, then the motion detection time span will
be 10 seconds.Assuming that we set the time interval as “10” then, and the
first movement captured can be seen as start point of the motion detection,
and if the movement continues through 7 seconds of the 10 seconds
interval, then the alarm will be triggered at 7 seconds ( the first trigger point)
and motion detection action can be triggered (sending out notification)
anywhere between 7-10 seconds once the movement is detected.“10” Sec
interval is a complete cycle of the motion detection before it starts another
cycle of the same time interval. To be more specific, the first trigger point
can be calculated as the “Time interval minus three”.
 Day: set up the motion detection schedule.
 Start Time- End Time: set up the start time and end time on daily basis.