Product Info
Table Of Contents
- Product Overview
- Change Log
- Model Specification
- Introduction to Configuration Menu
- Access the Device
- Language and Time Setting
- LED Setting
- Volume and Tone Configuration
- Network Setting
- Intercom Call Configuration
- Audio& Video Codec Configuration for SIP Calls
- Access White List Configuration
- Relay Setting
- Door Access Schedule Management
- Door Unlock Configuration
- Security
- Monitor and Image
- Logs
- Debug
- Firmware Upgrade
- Backup
- Auto-provisioning via Configuration File
- Integration with Third Party Device
- Password Modification
- System Reboot&Reset
- Abbreviations
- FAQ
- Contact us
Single TenantDoor Phone
AKUVOX SMART INTERCOMwww.akuvox.com 98
address/any information.Refer to: Intercom > Motion > Action to Execute.
Parameter Set-up:
HTTP URL: tick the check box to enable HTTP URL notification.
HTTP URL:if you choose HTTP mode, enter the URL format:http://http
server IP address/any information.
16.5. Security Action Configuration
16.5.1. Configure Push Button Action
When pressing the push button, the door phone will trigger the preconfigured
action type, the notification can be sent out by Email, FTP notification or SIP
call. To do this configuration on web Intercom > Basic interface.