Product Info
Table Of Contents
- Product Overview
- Change Log
- Model Specification
- Introduction to Configuration Menu
- Access the Device
- Language and Time Setting
- LED Setting
- Volume and Tone Configuration
- Network Setting
- Intercom Call Configuration
- Audio& Video Codec Configuration for SIP Calls
- Access White List Configuration
- Relay Setting
- Door Access Schedule Management
- Door Unlock Configuration
- Security
- Monitor and Image
- Logs
- Debug
- Firmware Upgrade
- Backup
- Auto-provisioning via Configuration File
- Integration with Third Party Device
- Password Modification
- System Reboot&Reset
- Abbreviations
- FAQ
- Contact us
Single TenantDoor Phone
AKUVOX SMART INTERCOMwww.akuvox.com 104
Parameter Set-up:
RTSP Server Enable: click on Enable and Disable in RTSP Enable field to
turn on or turn off the RTSP function.
RTSP Authorization Enabled: click on Enable and Disable in RTSP
Authorization field to enable or disable the RTSP authorization. If you
enable the RTSP Authorization, you are required to enter RTSP
Authentication Type, RTSP Username, RTSP Password on the intercom
device such as indoor monitor for authorization.
RTSP User Name: enter the name used for RTSP authorization.
RTSP User Password: enter the password for RTSP authorization.
RTSP Authentication Type: select RTSP authentication type between
“Basic” and “Digest”. “Basic“ is the default authentication type.
17.1.2. RTSP Stream Setting
You can select the video codec format for the RTSP stream for the monitoring
and configure video resolution and bit-rate etcbased on your actual network