Product Info
Table Of Contents
- Product Overview
- Change Log
- Model Specification
- Introduction to Configuration Menu
- Access the Device
- Language and Time Setting
- LED Setting
- Volume and Tone Configuration
- Network Setting
- Intercom Call Configuration
- Audio& Video Codec Configuration for SIP Calls
- Access White List Configuration
- Relay Setting
- Door Access Schedule Management
- Door Unlock Configuration
- Security
- Monitor and Image
- Logs
- Debug
- Firmware Upgrade
- Backup
- Auto-provisioning via Configuration File
- Integration with Third Party Device
- Password Modification
- System Reboot&Reset
- Abbreviations
- FAQ
- Contact us
Single TenantDoor Phone
AKUVOX SMART INTERCOMwww.akuvox.com 126
time it boots up. Select “Repeatedly”, if you want the device to perform
autop according to the schedule you set up. select “Power On +
Repeatedly” if you want to combine Power On Mode and Repeatedly
mode that will enable the device to perform Autop every time it boots up or
according to the schedule you set up. select “Hourly Repeat” if you want
the device to perform Autop every hour.
Schedule: if “Repeatedly” is selected, you can set up the time schedulefor
the AutoP.
22.4. PNP Configuration
Plug and Play (PNP) is a combination of hardware and software support that
enables a computer system to recognize and adapt to hardwareconfiguration
changes with little or no intervention by a user. To do this configuration on web
Upgrade >Advanced>PNP Option interface.