Product Info

Single TenantDoor Phone
AKUVOX SMART INTERCOMwww.akuvox.com 131
device to be integrated.
 Wiegand Transfer Mode:select Input, Output, Convert to Card
No.OutputWiegand. If the door phone is used as a receiver, then set it as
“Input” for the door phone. Select “Output” if you want wiegand output to
be converted to card number before sending it from the door phone to a
receiver. For facial recognition access, the user card number
corresponding to the facial recognition access will be sent out in binary
system.
 Wiegand Input Data Order: set the Wiegand input data sequence between
“Normal” and “Reversed” if you select “Reversed” then the input card
number will be reversed and vice versa.
 Wiegand Output Data Order: set the Wiegand output data sequence
between “Normal” and “Reversed” if you select “Reversed” then the input
card number will be reversed and vice versa.
 Wiegand Output CRC: tick to enable the parity check function to ensure
that signal-based data can be transmitted correctly according to the
established data transmission format.
You can configure the wiegand output mode if needed. The output occurs