Product Info
Table Of Contents
- Product Overview
- Change Log
- Model Specification
- Introduction to Configuration Menu
- Access the Device
- Language and Time Setting
- LED Setting
- Volume and Tone Configuration
- Network Setting
- Intercom Call Configuration
- Audio& Video Codec Configuration for SIP Calls
- Access White List Configuration
- Relay Setting
- Door Access Schedule Management
- Door Unlock Configuration
- Security
- Monitor and Image
- Logs
- Debug
- Firmware Upgrade
- Backup
- Auto-provisioning via Configuration File
- Integration with Third Party Device
- Password Modification
- System Reboot&Reset
- Abbreviations
- FAQ
- Contact us
Single TenantDoor Phone
AKUVOX SMART INTERCOMwww.akuvox.com 135
4
Basic
If this mode is
selected, you are required to fill
in the User name and the password for the
authentication.In Authorization field of HTTP
request header, use Base64 encode method to
encode of username and password.
5
Digest
Password encryption method only supports
MD5. MD5( Message-Digest Algorithm)
In Authorization field of Http request header:
WWW-Authenticate:Digest
realm="HTTPAPI",qop="auth,auth-int",nonce="
xx", opaque="xx".
6
Token
This mode is used by Akuvox developers only.
23.3. Lift Control Configuration
Integration between the door phone and third party devices such as intercom
devices for door access and lift control should be configured in the device web
interface before the integration can be made.
Life control should be configured properly on the door phone’s web
Intercom >Lift Control>Lift Control Listinterface before you can implement the