Product Info
Table Of Contents
- Product Overview
- Change Log
- Model Specification
- Introduction to Configuration Menu
- Access the Device
- Language and Time Setting
- LED Setting
- Volume and Tone Configuration
- Network Setting
- Intercom Call Configuration
- Audio& Video Codec Configuration for SIP Calls
- Access White List Configuration
- Relay Setting
- Door Access Schedule Management
- Door Unlock Configuration
- Security
- Monitor and Image
- Logs
- Debug
- Firmware Upgrade
- Backup
- Auto-provisioning via Configuration File
- Integration with Third Party Device
- Password Modification
- System Reboot&Reset
- Abbreviations
- FAQ
- Contact us
Single TenantDoor Phone
AKUVOX SMART INTERCOMwww.akuvox.com 137
23.4. KeyKing Setting
To integrate KeyKing lift controller, you are required to set up the KeyKing
address obtained from your solution provider. You can navigate to
Intercom >Lift Control> KeyKing Advance Setting.
Parameter Set-up:
KeyKing Address: enter the KeyKing address provided by your solution
provider. The address number must be identical with the address number on
the lift controller board.
Note:
Please consult with Akuvox technical support if you
have any
inquiries on the integration mode of any OEM lift controller integration
project.