Product Info
Table Of Contents
- Product Overview
- Change Log
- Model Specification
- Introduction to Configuration Menu
- Access the Device
- Language and Time Setting
- LED Setting
- Volume and Tone Configuration
- Network Setting
- Intercom Call Configuration
- Audio& Video Codec Configuration for SIP Calls
- Access White List Configuration
- Relay Setting
- Door Access Schedule Management
- Door Unlock Configuration
- Security
- Monitor and Image
- Logs
- Debug
- Firmware Upgrade
- Backup
- Auto-provisioning via Configuration File
- Integration with Third Party Device
- Password Modification
- System Reboot&Reset
- Abbreviations
- FAQ
- Contact us
Single TenantDoor Phone
AKUVOX SMART INTERCOMwww.akuvox.com 139
Port: enter the port of Akuvox EC32 controller server.
Timeout (Sec): enter the lift controller timeout. For example, if you set the
timeout as “30 seconds” have to press the lift button corresponding to the
floor you are going to within 30 seconds, otherwise, the button will be
locked again, and you have to go out of the lift and do it all over again.
User Name: enter the user name of the lift controller for the authentication.
Password: enter the password of the lift controller for the authentication.
Floor NO. Parameter: enter the Floor number parameter provided by
Akuvox. The default parameter string is “$floor”. You can define your own
parameter string if needed.
URL To Trigger Specific Floor: enter the Akuvox life control URL for
triggering a specific floor. The URL is “/cdor.cgi?open=0&door=$floor”, but
the string “$floor” at the end must be identical with the parameter string
you defined.
URL To Trigger All Floors: enter the Akuvox URL for triggering all floors.