Product Info
Table Of Contents
- Product Overview
- Change Log
- Model Specification
- Introduction to Configuration Menu
- Access the Device
- Language and Time Setting
- LED Setting
- Volume and Tone Configuration
- Network Setting
- Intercom Call Configuration
- Audio& Video Codec Configuration for SIP Calls
- Access White List Configuration
- Relay Setting
- Door Access Schedule Management
- Door Unlock Configuration
- Security
- Monitor and Image
- Logs
- Debug
- Firmware Upgrade
- Backup
- Auto-provisioning via Configuration File
- Integration with Third Party Device
- Password Modification
- System Reboot&Reset
- Abbreviations
- FAQ
- Contact us
Single TenantDoor Phone
AKUVOX SMART INTERCOMwww.akuvox.com 21
8.2. IP Announcement
To set up device IP number announcement, navigate to Phone > Audio > IP
announcement.
Parameter Set-up:
Active Time After Reboot: select IP announcement time after the device
reboot. For example, if you set it as 30 seconds, then you must press the
call button within 30 seconds for the IP announcement after the device is
rebooted, otherwise, the IP announcement will expire. If you set it as “0”
seconds, then you can press the call button any time after the reboot for
the IP announcement.
Loop Times: set the IP announcement loop times.
8.3. Open Door Tone Configuration