Product Info
Table Of Contents
- Product Overview
- Change Log
- Model Specification
- Introduction to Configuration Menu
- Access the Device
- Language and Time Setting
- LED Setting
- Volume and Tone Configuration
- Network Setting
- Intercom Call Configuration
- Audio& Video Codec Configuration for SIP Calls
- Access White List Configuration
- Relay Setting
- Door Access Schedule Management
- Door Unlock Configuration
- Security
- Monitor and Image
- Logs
- Debug
- Firmware Upgrade
- Backup
- Auto-provisioning via Configuration File
- Integration with Third Party Device
- Password Modification
- System Reboot&Reset
- Abbreviations
- FAQ
- Contact us
Single TenantDoor Phone
AKUVOX SMART INTERCOMwww.akuvox.com 55
Parameters Set-up:
Dial in Time:enter the dial in time duration for your door phone (ranging
from 30-120 sec.) for example, if you set the dial in time duration is 60
seconds in your door phone, then the door phone will hang up the
incoming call automatically if the call is not answered by the door phone in
60 seconds. 60 seconds is the dial in time duration by default.
Dial out Time: enter the dial in time duration for your door phone (ranging
from 5-120 sec.) for example, if you set the dial out time duration is 60
seconds in your door phone, then the door phone will hang up the call it
dialed out automatically if the call is not answered by the device being
called.
Note:
Max dial time of device is also related with max dial time of SIP server.
If using SIP account to make a call, please pay attention to the max dial
time of SIP server. If the max dial time of SIP server is shorter than the
max dial time of device, the shorter one is available.