Product Info
Table Of Contents
- Product Overview
- Change Log
- Model Specification
- Introduction to Configuration Menu
- Access the Device
- Language and Time Setting
- LED Setting
- Volume and Tone Configuration
- Network Setting
- Intercom Call Configuration
- Audio& Video Codec Configuration for SIP Calls
- Access White List Configuration
- Relay Setting
- Door Access Schedule Management
- Door Unlock Configuration
- Security
- Monitor and Image
- Logs
- Debug
- Firmware Upgrade
- Backup
- Auto-provisioning via Configuration File
- Integration with Third Party Device
- Password Modification
- System Reboot&Reset
- Abbreviations
- FAQ
- Contact us
Single TenantDoor Phone
AKUVOX SMART INTERCOMwww.akuvox.com 59
Parameter Set-up:
Name: check to select the H264 video codec format for the door phone
videostream. H264 is the video codec by default.
Resolution: select the code resolution for the video quality among four
options:“QCIF”, “CIF”, “VGA”, “4CIF” and “720P” according to your actual
network environment. The default code resolution is 4CIF.
Bitrate: select the video stream bit rate (Ranging from 320-2048). The
greater the bitrate, the data transmitted in every second is greater in
amount therefore the video will be clearer. While the default code bitrate is
2048.
Payload: select the payload type (ranging from 90-118) to configure
audio/video configuration file. The default payload is 104.
11.3. Video Codec Configuration for IP Direct Calls
You can select the IP call video quality by selecting the proper codec
resolution according to your actual network condition. To do so , you can go to