Product Info
Table Of Contents
- Product Overview
- Change Log
- Model Specification
- Introduction to Configuration Menu
- Access the Device
- Language and Time Setting
- LED Setting
- Volume and Tone Configuration
- Network Setting
- Intercom Call Configuration
- Audio& Video Codec Configuration for SIP Calls
- Access White List Configuration
- Relay Setting
- Door Access Schedule Management
- Door Unlock Configuration
- Security
- Monitor and Image
- Logs
- Debug
- Firmware Upgrade
- Backup
- Auto-provisioning via Configuration File
- Integration with Third Party Device
- Password Modification
- System Reboot&Reset
- Abbreviations
- FAQ
- Contact us
Single TenantDoor Phone
AKUVOX SMART INTERCOMwww.akuvox.com 61
11.4. Configure DTMF Data Transmission
In order to achieve the door access via DTMF code or some other applications,
you are required to properly configure DTMF on web Account > Advanced >
DTMF in order to establish a DTMF-based data transmission between the door
phone and other intercom devices for the third party integration.
Parameter Set-up:
Type:select DTMF mode among five options: “Inband”, “RFC2833”,
“Info+Inband” and “Info+RFC2833” based on the specific DTMF
transmission type of the third party device to be matched with as the party
for receiving signal data.
How to Notify DTMF: select among four types: “Disable” “DTMF”
“DTMF-Relay” “Telephone-Event” according to the specific type adopted