Product Info

Single TenantDoor Phone
AKUVOX SMART INTERCOMwww.akuvox.com 66
 Type: if Default state is selected, the Relay Status shows Low which
means the door is closed, the Relay Status shows which means the door is
opened. If Invert State is selected, the Relay Status hows High which
means the door is closed, and Low means the door is opened.
 Mode: there are two modes Monostable and Bistable. If Monostable is
selected, the relay status will be automatically reset within the relay delay
time after the relay is triggered. If Bistable is selected, relay status will be
reset after the relay is triggered again.
 Trigger Delay (Sec): set the relay trigger delay timing (Ranging from 1-10
Sec.) For example, if you set the delay time as “5” sec. then the relay will
not be triggered until 5 seconds after you press “unlock“ tab.
 Hold Delay (Sec): set the relay hold delay timing (Ranging from 1-10 Sec.)
For example, if you set the hold delay time as “5” Sec.Then the relay will
resume the initial state after maintaining the triggered state for 5s.
 DTMF Mode: select the number of DTMF digits for the door access control
(Ranging from 1-4 digits ) For example, you can select 1 digit DTMF code
or 2-digit DTMF code, etc., according to your need.