Product Info
Table Of Contents
- Product Overview
- Change Log
- Model Specification
- Introduction to Configuration Menu
- Access the Device
- Language and Time Setting
- LED Setting
- Volume and Tone Configuration
- Network Setting
- Intercom Call Configuration
- Audio& Video Codec Configuration for SIP Calls
- Access White List Configuration
- Relay Setting
- Door Access Schedule Management
- Door Unlock Configuration
- Security
- Monitor and Image
- Logs
- Debug
- Firmware Upgrade
- Backup
- Auto-provisioning via Configuration File
- Integration with Third Party Device
- Password Modification
- System Reboot&Reset
- Abbreviations
- FAQ
- Contact us
Single TenantDoor Phone
AKUVOX SMART INTERCOMwww.akuvox.com 67
1 Digit DTMF: set the 1-digt DTMF code within range from ( 0-9 and *,#) if
the DTMF Option is set as “1-digit”.
2~4 Digits DTMF: set the DTMF code according to the DMTP Option
setting. For example, you are required to set the 3-digits DTMF code if
DTMP Option is set as 3-digits.
Relay Status: relay status is low by default which means normally
closed(NC) If the relay status is high, then it is in Normally Open
status(NO).
Relay Name: name the relay switch according to your need. For example,
you can name the relay switch according to where the relay switch is
located for convenience.
Note:
Only the external devices connected to the relay switch need to be
powered by power adapters as relay switch does not supply power.