Product Info
Table Of Contents
- Product Overview
- Change Log
- Model Specification
- Introduction to Configuration Menu
- Access the Device
- Language and Time Setting
- LED Setting
- Volume and Tone Configuration
- Network Setting
- Intercom Call Configuration
- Audio& Video Codec Configuration for SIP Calls
- Access White List Configuration
- Relay Setting
- Door Access Schedule Management
- Door Unlock Configuration
- Security
- Monitor and Image
- Logs
- Debug
- Firmware Upgrade
- Backup
- Auto-provisioning via Configuration File
- Integration with Third Party Device
- Password Modification
- System Reboot&Reset
- Abbreviations
- FAQ
- Contact us
Single TenantDoor Phone
AKUVOX SMART INTERCOMwww.akuvox.com 68
13.2. Web Relay Setting
In addition to the relay that is connected to the door phone, you can also
control the door access using the network-based web relay on the device and
on the device web interface.
Web relay needs to be set up on the web Phone > WebRelay interface where
you are required to fill in such information as relay IP address, password, web
relay action, etc before you can achieve the door access via web relay.
Note:
If DTMF mode is set as “
1 Digit DTMF
”, you cannot edit DTMF
code in “
2~4 Digits DTMF”
field. And if you set DTMF mode from
2-4 in “
2~4 Digits DTMF”
field, you can not edit DTMF code in
“1
Digit DTMF”
field.