Product Info

Single TenantDoor Phone
AKUVOX SMART INTERCOMwww.akuvox.com 71
Parameter Set-up:
 Relay ID: the relay you use to supply power.
 12V Power Output: select Disabled to disable the power output function;
select Always to enable the access controller to provide continuous power
to the third party device. Select Trigger By Open Relay if you want the
R20Ato provide power to the third party device via 12 output and GND
interface during the timeout when the status of relays is shifted from low to
high.
Note:
 ‘12V Power Output’ is disabled under POE mode.