Product Info
Table Of Contents
- Product Overview
- Change Log
- Model Specification
- Introduction to Configuration Menu
- Access the Device
- Language and Time Setting
- LED Setting
- Volume and Tone Configuration
- Network Setting
- Intercom Call Configuration
- Audio& Video Codec Configuration for SIP Calls
- Access White List Configuration
- Relay Setting
- Door Access Schedule Management
- Door Unlock Configuration
- Security
- Monitor and Image
- Logs
- Debug
- Firmware Upgrade
- Backup
- Auto-provisioning via Configuration File
- Integration with Third Party Device
- Password Modification
- System Reboot&Reset
- Abbreviations
- FAQ
- Contact us
Single TenantDoor Phone
AKUVOX SMART INTERCOMwww.akuvox.com 78
ID Support Enabled: tick this feature to allow to use ID card for door
access.
15.2. Configure Access Card Format
If you want to integrate with the third party intercom system in terms of RF card
door access, you can change the RF card code format to be identical with that
applied in the third party system.You can do this configuration on web
Intercom >Card Setting interface.
Parameters Set-up:
ICCARD Display Mode: select the card code format for the IC card for the
door access among five format options: 8H10D; 6H3D5D(W26); 6H8D;
8HN; 8HR. The card code format is 8HN by default in the door phone.