Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Language and Time Setting
- 7.LED Setting
- 8.Volume and Tone Configuration
- 9.Network Setting
- 10.Intercom Call Configuration
- 11.Audio& Video Codec Configuration for SIP Calls
- 12.Access White List Configuration
- 13.Relay Setting
- 14.Door Access Schedule Management
- 15.Door Unlock Configuration
- 16.Security
- 17.Monitor and Image
- 18.Logs
- 19.Debug
- 20.Firmware Upgrade
- 21.Backup
- 22.Auto-provisioning via Configuration File
- 23.Integration with Third Party Device
- 24.Password Modification
- 25.System Reboot&Reset
- 26.Abbreviations
- 27.Contact us
Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
97
23.5.Akuvox EC32 Lift Controller
You are required to configure Akuvox EC32 before you can connect the door
phone to the lift controller. You can navigate to Intercom > Lift Control >
Akuvox EC32 & ZKT Advance Setting.
Parameter Set-up:
Server IP: enter the IP address of the Akuvox EC32 controller server.
Port: enter the port of Akuvox EC32 controller server.
Timeout (Sec): enter the lift controller timeout. For example, if you set the
timeout as “30 seconds” have to press the lift button corresponding to
the floor you are going to within 30 seconds, otherwise, the button will be
locked again, and you have to go out of the lift and do it all over again.
User Name: enter the user name of the lift controller for the