Product Info

ManualsBrandsAKUVOX NETWORKS ManualsElectronicsDoor Phone

101

102

103

104

105

106

107

108

109

110

Table Of Contents

1.Product Overview
2.Change Log
3.Model Specification
4.Introduction to Configuration Menu
5.Access the Device
- 5.1.Obtain Device IP Address
- 5.2.Access the Device Setting on the Web Interface
6.Language and Time Setting
- 6.1.Language Setting
- 6.2.Time Setting
7.LED Setting
- 7.1.Infrared LED Setting
- 7.2.LED Display Status
- 7.3.Set up LED Display from HTTP URL
- 7.4.LED Setting on Card Reader Area
8.Volume and Tone Configuration
- 8.1.Volume Configuration
- 8.2.IP Announcement
- 8.3.Open Door Tone Configuration
- 8.4.Upload Tone Files
  - 8.4.1.Upload Ringback Tone
  - 8.4.2.Upload Open Door Tone
9.Network Setting
- 9.1.Network Status
- 9.2.Device Network Configuration
- 9.3.Device Deployment in Network
- 9.4.Device Local RTP configuration
- 9.5.NAT Setting
- 9.6.SNMP Setting
- 9.7.VLAN Setting
- 9.8.TR069 Setting
- 9.9.Device Web HTTP Setting
10.Intercom Call Configuration
- 10.1.IP call & IP Call Configuration
- 10.2.SIP Call &SIP Call Configuration
- 10.3.SIP Account Registration
- 10.4.SIP Server Configuration
- 10.5.Configure Outbound Proxy Server
- 10.6.Configure Data Transmission Type
- 10.7.Configure Calling Feature
11.Audio& Video Codec Configuration for SIP Calls
- 11.1.Audio Codec Configuration
- 11.2.Video Codec Configuration
- 11.3.Video Codec Configuration for IP Direct Calls
- 11.4.Configure DTMF Data Transmission
12.Access White List Configuration
- 12.1.Managing Contacts
13.Relay Setting
- 13.1.Relay Switch Setting
- 13.2.Web Relay Setting
14.Door Access Schedule Management
- 14.1.Relay schedule
- 14.2.Configure Door Access Schedule
15.Door Unlock Configuration
- 15.1.IC/ID Card Control
- 15.2.Configure Access Card Format
- 15.3.Configuring RF Card for Door Unlock
  - 15.3.1.Configure RF Card on the Web Interface
- 15.4.Import and Export Card Data of Access Control
- 15.5.Mifare/Defire CarD Encryption
  - 15.5.1.NFC Card Setting
- 15.6.Configure Open Relay via HTTP for Door Unlock
- 15.7.Configure Exit Button for Door Unlock
16.Security
- 16.1.Tamper Alarm Setting
- 16.2.Client Certificate Setting
  - 16.2.1.Web Server Certificate
  - 16.2.2.Client Certificate
- 16.3.Motion Detection
  - 16.3.1.Configure Motion Detection
- 16.4.Security Notification Setting
- 16.5.Security Action Configuration
- 16.6.Voice Encryption
- 16.7.User Agent
17.Monitor and Image
- 17.1.RTSP Stream Monitoring
- 17.2.MJPEG Image Capturing
- 17.3.ONVIF
- 17.4.Live Stream
18.Logs
- 18.1.Call Logs
- 18.2.Door Logs
19.Debug
- 19.1.System Log
- 19.2.PCAP
20.Firmware Upgrade
21.Backup
22.Auto-provisioning via Configuration File
- 22.1.Provisioning Principle
- 22.2.Configuration Files for Auto-provisioning
- 22.3.AutoP Schedule
- 22.4.PNP Configuration
- 22.5.Static Provisioning Configuration
23.Integration with Third Party Device
- 23.1.Integration via Wiegand
- 23.2.Integration via HTTP API
- 23.3.Lift Control Configuration
- 23.4.KeyKing Setting
- 23.5.Akuvox EC32 Lift Controller
- 23.6.ZKT Lift Controller
- 23.7.Chiyu Lift Controller
24.Password Modification
- 24.1.Modifying Device Web Interface Password
- 24.2.Configure Web Interface Automatic Logout
25.System Reboot&Reset
- 25.1.Reboot
- 25.2.Reset
26.Abbreviations
27.Contact us

Single Tenant Door Phone

AKUVOX SMART INTERCOM www.akuvox.com

 Timeout (Sec): enter the lift controller timeout. For example, if you set the

timeout as “30 seconds” have to press the lift button corresponding to

the floor you are going to within 30 seconds, otherwise, the button will be

locked again, and you have to go out of the lift and do it all over again.

23.7.Chiyu Lift Controller

You need to select Chiyu lift controller to integrate with Chiyu lift controller.

You can navigate to Intercom > Lift Control.