Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Language and Time Setting
- 7.LED Setting
- 8.Volume and Tone Configuration
- 9.Network Setting
- 10.Intercom Call Configuration
- 11.Audio& Video Codec Configuration for SIP Calls
- 12.Access White List Configuration
- 13.Relay Setting
- 14.Door Access Schedule Management
- 15.Door Unlock Configuration
- 16.Security
- 17.Monitor and Image
- 18.Logs
- 19.Debug
- 20.Firmware Upgrade
- 21.Backup
- 22.Auto-provisioning via Configuration File
- 23.Integration with Third Party Device
- 24.Password Modification
- 25.System Reboot&Reset
- 26.Abbreviations
- 27.Contact us
Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
11
Note:
Start Time and End Time will not be displayed unless you select
Specific Time for your LED mode.
7.2. LED Display Status
LED display adjustment is used to display the light changes of the call button
in the six statuses - normal(idle), offline, calling, talking and receiving a call.
and the user can also verify the current mode of the device through the LED
status. To set up on device web Intercom > LED Setting > LED Status
interface.
The default LED Display Status:
LED Status
Description
Blue
Always on
Normal status
Flashing
Calling
Red
Flashing
Network is unavailable
Green
Always
on
Talking on a call
Flashing
Receiving a call
Pink
Flashing
Upgrading
Parameters Set-up:
State: there are five states: Normal, Offline, Calling, Talking and
Receiving.