Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Language and Time Setting
- 7.LED Setting
- 8.Volume and Tone Configuration
- 9.Network Setting
- 10.Intercom Call Configuration
- 11.Audio& Video Codec Configuration for SIP Calls
- 12.Access White List Configuration
- 13.Relay Setting
- 14.Door Access Schedule Management
- 15.Door Unlock Configuration
- 16.Security
- 17.Monitor and Image
- 18.Logs
- 19.Debug
- 20.Firmware Upgrade
- 21.Backup
- 22.Auto-provisioning via Configuration File
- 23.Integration with Third Party Device
- 24.Password Modification
- 25.System Reboot&Reset
- 26.Abbreviations
- 27.Contact us
Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
22
9.4. Device Local RTP configuration
For the device network data transmission purpose, the device needs to be set
up with a range of RTP ports (Real-time Transport Protocol) for establishing
an exclusive range of data transmission in the network. Path: Network >
Advanced > Local RTP interface.
Parameter Set-up:
Min RTP Port: enter the Port value in order to establish the start point for
the exclusive data transmission range.
Max RTP port: enter the Port value in order to establish the end point for
the exclusive data transmission range.
9.5. NAT Setting
NAT (Network Address Translation) allows hosts in an organization’s private
intranet to transparently connect to hosts in the public domain. There is no
need for internal hosts to have registered Internet addresses. It is a way to
translate the internal private network IP address into a legal network IP
address technology. To do this configuration on web Account > Advance >
NAT interface.