Product Info

Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
23
Parameter Set-up:
 UDP Keep Alive Messages: if enabled, the device will send out the
message to the SIP server so that the SIP server will recognize if the
device is in online status.
 UDP Alive Msg Interval: set the message sending time interval from 5-60
seconds, the default is 30 seconds.
 RPort: enable the Rport when the SIP server is in WAN (Wide Area
Network).
9.6. SNMP Setting
SNMP (Simple Network Management Protocol) is an Internet-standard
protocol for managing devices on IP networks. SNMP is widely used in the
network management system to monitor network-attached devices for
conditions that may draw network administrative attention. SNMP exposes
management data in the form of variables on the managed systems, which
describe the system configuration. These variables can then be queried by
managing applications. These variables accessible via SNMP are organized
in hierarchies, which are described by Management Information Bases
(MIBs). To do the configuration on the web Network > Advanced > SNMP
interface.