Product Info

Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
24
Parameter Set-up：
 Active: to enable or disable SNMP feature.
 Port: to configure SNMP server’s port.
 Trusted IP: to configure allowed SNMP server address. It could be an IP
address or any valid URL domain name.
9.7. VLAN Setting
Virtual Local Area Network is a logical grouping of two or more nodes which
are not necessarily on the same physical network segment but which share
the same logical IP domain. To be specific, the purpose of VLAN is to
separate layer 2 broadcast domain. Within trunk links, the tagged packet will
only be sent to those ports with the same VLAN ID. This is usually achieved
by switch or router. User can benefit from deployed VLAN, such as: *Security:
if without VLAN, all host will be included in unique broadcast domain.
Therefore, the consequence of ARP attack will affect all end devices in the
organization. *Performance: The nature of network broadcast is to flood
frames among the network. In certain conditions, it is unnecessary to receive
broadcast frame. To save bandwidth for high efficiency, it will be better to
separate the broadcast domain by deploying VLAN. To do the configuration
on the web Network > Advanced > VLAN interface.
Parameter Set-up:
 Active: to enable or disable VLAN feature for designated port.
 VID: to configure VLAN ID for designated port.
 Priority: to select VLAN priority for designated port.