Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Language and Time Setting
- 7.LED Setting
- 8.Volume and Tone Configuration
- 9.Network Setting
- 10.Intercom Call Configuration
- 11.Audio& Video Codec Configuration for SIP Calls
- 12.Access White List Configuration
- 13.Relay Setting
- 14.Door Access Schedule Management
- 15.Door Unlock Configuration
- 16.Security
- 17.Monitor and Image
- 18.Logs
- 19.Debug
- 20.Firmware Upgrade
- 21.Backup
- 22.Auto-provisioning via Configuration File
- 23.Integration with Third Party Device
- 24.Password Modification
- 25.System Reboot&Reset
- 26.Abbreviations
- 27.Contact us
Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
29
10.3.SIP Account Registration
Akuvox door phones support two SIP accounts that can all be registered
according to your applications. You can, for example, switch between them if
any one of the accounts failed and become invalid. The SIP account can be
configured on the device and on the device interface. To perform the SIP
account setting on the Web Account > Basic > SIP Account Interface.
Parameter Set-up:
Status: check to see if the SIP account is registered or not.
Account: select the exact account (Account 1&2) to be configured.
Account Enabled: click Enable or Disable to activate or deactivate the
registered SIP account.
Display Label: configure the device label to be shown on the device
screen.
Display Name: configure the name, for example, the device’s name to be
shown on the device being called to.
Register Name: enter the SIP account register Name obtained from the
SIP account administrator.
User Name: enter the user name obtained from SIP account
administrator.