Product Info

Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
42
audio/video configuration file. The default payload is 104.
11.3.Video Codec Configuration for IP Direct Calls
You can select the IP call video quality by selecting the proper codec
resolution according to your actual network condition. To do so , you can go
to Phone > Call Feature > IP Video Parameters.
Parameter Set-up：
 Video Resolution: select the code resolution for the video quality among
four options: “CIF”, “VGA”, “4CIF” and “720P”. The default code
resolution is 4CIF.
 Video Bitrate: Video Bitrate: select video bit-rate among six options: “64
kbps”, “256kbps”, “512 kbps”, “1024 kbps”, “2048 kbps” according to
your network environment. The default video bit-rate is “2048 kpbs”.
 Video Payload: select the payload type (ranging from 90-118) to
configure audio/video configuration file. The default payload is 104.
11.4.Configure DTMF Data Transmission
In order to achieve the door access via DTMF code or some other
applications, you are required to properly configure DTMF on web Account >
Advanced > DTMF in order to establish a DTMF-based data transmission
between the door phone and other intercom devices for the third party
integration.