Product Info

Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
48
Note:
 If DTMF mode is set as “1 Digit DTMF”, you cannot edit DTMF
code in “2~4 Digits DTMF” field. And if you set DTMF mode from
2-4 in “2~4 Digits DTMF” field, you can not edit DTMF code in “1
Digit DTMF” field.
13.2.Web Relay Setting
In addition to the relay that is connected to the door phone, you can also
control the door access using the network-based web relay on the device
and on the device web interface.
Web relay needs to be set up on the web Phone > WebRelay interface where
you are required to fill in such information as relay IP address, password, web
relay action, etc before you can achieve the door access via web relay.
Parameter Set-up:
 Type: select among three options “Disabled” “Web Relay” and “Both”.
Select “Web relay” to enable the web relay. Select “Disable” to disable the