Product Info

Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
49
web relay. Select “Both” to enable both local relay and web relay.
 IP Address: enter the web relay IP address provided by the web relay
manufacturer.
 User Name: enter the User name provided by the web relay manufacturer.
 Password: enter the password provided by the web relay manufacturer.
The password is authenticated via HTTP and you can define the
passwords using “http get” in Action.
 Web Relay Action: enter the specific web relay action command provided
by the web manufacturer for different actions by the web relay. Without
adding IP, username, pwd, you can fill in the HTTP command in the web
relay action, so you can configure multiple web relays. See the HTTP
command example below:
a. If you do not fill in IP address in the IP Address Field above, fill in a
complete HTTP command.
For example, Http://admin:admin@192.168.1.2/state.xml?relayState=2.
( HTTP://:@IP address>/state.xml?relayState=2)
b. If you have already filled in the IP address above, fill in the omitted
HTTP command, eg. state.xml?relayState=2.
 Web Relay Key: it can be null or enter the configured DTMF code, when
the door is unlock via DTMF code, the action command will be sent to the
web relay automatically.
 Web Relay Extension: it can be null or enter the relay extension
information, which can be a SIP Account user name of an intercom
device such as an indoor monitor, so that the specific action command
will be sent when unlock is performed on the intercom device, while this
setting is optional.