Product Info

Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
65
be 10 seconds. Assuming that we set the time interval as “10” then, and
the first movement captured can be seen as start point of the motion
detection, and if the movement continues through 7 seconds of the 10
seconds interval, then the alarm will be triggered at 7 seconds ( the first
trigger point) and motion detection action can be triggered (sending out
notification) anywhere between 7-10 seconds once the movement is
detected.“10” Sec interval is a complete cycle of the motion detection
before it starts another cycle of the same time interval. To be more
specific, the first trigger point can be calculated as the “Time interval
minus three”.
 Day: set up the motion detection schedule.
 Start Time- End Time: set up the start time and end time on daily basis.