Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Language and Time Setting
- 7.LED Setting
- 8.Volume and Tone Configuration
- 9.Network Setting
- 10.Intercom Call Configuration
- 11.Audio& Video Codec Configuration for SIP Calls
- 12.Access White List Configuration
- 13.Relay Setting
- 14.Door Access Schedule Management
- 15.Door Unlock Configuration
- 16.Security
- 17.Monitor and Image
- 18.Logs
- 19.Debug
- 20.Firmware Upgrade
- 21.Backup
- 22.Auto-provisioning via Configuration File
- 23.Integration with Third Party Device
- 24.Password Modification
- 25.System Reboot&Reset
- 26.Abbreviations
- 27.Contact us
Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
66
16.4.Security Notification Setting
16.4.1. Email Notification Setting
If you want to receive the security notification via email, you can configure
the Email notification on the web Intercom > Action > Email Notification
interface properly. The email notification will show as the captures.
Parameter Set-up:
Sender's email address: enter the sender’s email address from which the
email notification will be sent out.
Receiver's Email Address: enter the receiver’s email address.
SMTP Server Address: enter the SMTP server address of the sender.
SMTP User Name: enter the SMTP user name, which is usually the same
as the sender’s email address.
SMTP Password: configure the password of SMTP service, which is the
same as the sender’s email address.