Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Language and Time Setting
- 7.LED Setting
- 8.Volume and Tone Configuration
- 9.Network Setting
- 10.Intercom Call Configuration
- 11.Audio& Video Codec Configuration for SIP Calls
- 12.Access White List Configuration
- 13.Relay Setting
- 14.Door Access Schedule Management
- 15.Door Unlock Configuration
- 16.Security
- 17.Monitor and Image
- 18.Logs
- 19.Debug
- 20.Firmware Upgrade
- 21.Backup
- 22.Auto-provisioning via Configuration File
- 23.Integration with Third Party Device
- 24.Password Modification
- 25.System Reboot&Reset
- 26.Abbreviations
- 27.Contact us
Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
70
16.5.3. Configure Input Action
When Input interface is working , it can also trigger an action. You can do this
configuration on web Intercom > Input interface.
Parameter Set-up:
Action to execute: to choose which action to execute after triggering.
16.5.4. Call Event Notification
If you want to be notified of the call event (call receiving, answering, etc.)
navigate to Intercom > Basic > Call Event.
Parameter Set-up:
Action To Execute: select the method to carry out the action among four
options: FTP, Email, HTTP, TFTP.
HTTP URL: enter the URL if you select the HTTP to carry out the action.