Product Info

Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
83
19.2.PCAP
PCAP in Akuvox door phone is used to capture the data package going in and
out of the devices for debugging and troubleshooting purposes. You can set
up the PCAP on the device web Upgrade > Advanced > PCAP interface
properly before using it.
Parameter Set-up:
 Specific Port: select the specific ports from 1-65535 so that only the
data packet from the specific port can be captured. You can leave the
field blank by default.
 PCAP: click Start tab and Stop tab to capture a certain range of data
packets before clicking Export tab to export the data packets to your
Local PC.
 PCAP Auto Refresh: select “Enable” or “Disable” to turn on or turn off the
PCAP auto fresh function. If you set it as “Enable” then the PCAP will
continue to capture data packets even after the data packets reached
their 1M maximum in capacity. If you set it as “Disable” the PCAP will
stop data packet capturing when the data packet captured reached the
maximum capturing capacity of 1MB.
 New PCAP: click start to capture bigger data package.