Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Language and Time Setting
- 7.LED Setting
- 8.Volume and Tone Configuration
- 9.Network Setting
- 10.Intercom Call Configuration
- 11.Audio& Video Codec Configuration for SIP Calls
- 12.Access White List Configuration
- 13.Relay Setting
- 14.Door Access Schedule Management
- 15.Door Unlock Configuration
- 16.Security
- 17.Monitor and Image
- 18.Logs
- 19.Debug
- 20.Firmware Upgrade
- 21.Backup
- 22.Auto-provisioning via Configuration File
- 23.Integration with Third Party Device
- 24.Password Modification
- 25.System Reboot&Reset
- 26.Abbreviations
- 27.Contact us
Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
89
Plug and Play (PNP) is a combination of hardware and software support that
enables a computer system to recognize and adapt to hardware
configuration changes with little or no intervention by a user. To do this
configuration on web Upgrade > Advanced > PNP Option interface.
22.5.Static Provisioning Configuration
You can manually set up a specific server URL for downloading the firmware
or configuration file. If an autop schedule is set up, the door phone will
perform the auto provisioning at a specific time according to Autop schedule
you set up. In addition, TFTP, FTP, HTTP, and HTTPS are the protocols that
can be used for upgrading the device firmware and configuration.
Parameter Set-up:
URL: set up TFTP, HTTP, HTTPS, FTP server address for the provisioning
User Name: set up a user name if the server needs a user name to be
accessed otherwise leave it blank.
Password: set up a password if the server needs a password to be
accessed otherwise leave it blank.
Common AES Key: set up AES code for the intercom to decipher the