User Guide

8
R20K
Admin Guide
3.3.2. Time
NTP: To select local time zone for NTP server.
3.3.3. Network
DHCP Mode
In Website, go to Network - Basic.
R20K uses DHCP mode by default which will get IP address,
subnet mask, default gateway and DNS server address from DHCP
server automatically.
Static IP Mode
In Website, go to Network - Basic.
If select static IP, users should manually setup IP address, subnet
mask, default gateway and DNS server address. The figure right
shows static IP settings.
Figure 3.4.2 Time
Figure 3.4.3.1 DHCP mode
Figure 3.4.3.2 Static IP mode
Figure 3.3.2.1 Time