User Guide

13
R20K
Admin Guide
3.4.8. Speed Dial
Speed dialfeature is used to call out 4 numbers at the same time.
Go to Intercom - Basic to configure first.
After setup the number which users need to call. Press
“Managecenter key” (Manager Dial) to call.
3.4.9. Auto Answer
Go to Account - Advanced to enable auto answer feature for SIP
calls.
Go to Phone - Call Feature to enable auto answer feature for direct
IP calls.
Auto Answer Delay: To configure delay time before an incoming
call is automatically answered.
Auto Answer Mode: To set video or audio mode for auto answer
feature. It is video by default.
Then incoming calls will be answered automatically.
Figure 3.5.4Speed dial
Figure 3.5.5-3 Auto answer options’ parameters
Figure 3.5.5-2 Auto answer for direct IP calls
Figure 3.5.5-1 Auto answer for sip calls