Product Info

Multi Tenant Door Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
17
7.LED Setting
7.1. Infrared LED Setting
Infrared LED is applied in the dark environment in which a resident might not
be able to see a visitor clearly via the video from the door phone. If the
infrared LED is turned off, the door phone will turn to night mode so that you
can have a clear view of the visitor. You can setup it on device web
Intercom > Advanced interface.
Parameter Set-up:
 Photoresistor Setting ： set the minimum and maximum photoresistor
value based on the current actual photo-resistor value detected to
control the ON-OFF of the LED light. You can set the maximum
photoresistor value for the IR LED to be turned on and the minimum value
for it to be turned off. While the default Minimum and maximum
photoresistor value is from “0” minimum to “1000” maximum
respectively.
 Now: click Read to obtain the current environment brightness.