Product Info

Multi Tenant Door Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
19
7.3. LED Settings on Keypad
You can enable or disable the LED lighting of keypad as needed on the web
interface. Meanwhile, If you prefer not to have the LED light of keypad stay on,
you can also set the timing for the exact time span during which the LED light
can be enabled in order to reduce the electrical power consumption etc. To
do this configuration on the web Intercom > LED Setting interface.
Parameter Set-up:
 Keypad LED Enable: Click to enable or disable the keypad LED lighting.
 Start Time (H): Enter the time span for the LED lighting to be valid. Eg. If
the time span is from 18-22 it means LED light will stay on during the
time span from 6:00 pm to 22:00 pm during a day.
7.4. LED Settings on Screen
You can enable or disable the LED lighting of screen as needed on the web
interface. Meanwhile, If you prefer not to have the LED light of screen stay on,
you can also set the timing for the exact time span during which the LED light
can be enabled in order to reduce the electrical power consumption etc.
Parameter Set-up:
 Wake Mode: There are two modes - Auto and Manual for waking up the
device when idle. If you select “Auto” mode then the screen will be
awakened when someone approaches, the IR sensor will be triggered.