Product Info

ManualsBrandsAKUVOX NETWORKS ManualsElectronicsDoor Phone

Table Of Contents

1.Product Overview
2.Change Log
3.Model Specification
4.Introduction to Configuration Menu
5.Access the Device
- 5.1.Obtain Device IP Address
- 5.2.Access the Device Setting on the Web Interface
6.Language and Time Setting
- 6.1.Language Setting
- 6.2.Time Setting
7.LED Setting
- 7.1. Infrared LED Setting
- 7.2.LED Setting on Card Reader Area
- 7.3.LED Settings on Keypad
- 7.4.LED Settings on Screen
8.Volume and Tone Configuration
- 8.1.Volume Configuration
  - 8.1.1.Open Door Tone Configuration
  - 8.1.2.Upload Tone Files
    - 8.1.2.1.Upload Ringback Tone
    - 8.1.2.2.Upload Open Door Tone
9.Network Setting
- 9.1.Network Status
- 9.2.Device Network Configuration
- 9.3.Device Deployment in Network
- 9.4.Device Local RTP configuration
- 9.5.NAT Setting
- 9.6.SNMP Setting
- 9.7.VLAN Setting
- 9.8.TR069 Setting
- 9.9.Device Web HTTP Setting
10.Intercom Call
- 10.1.IP call & IP Call Configuration
- 10.2.SIP Call &SIP Call Configuration
- 10.3.Call Session Timer
- 10.4.Configure Calling Feature
11.Audio& Video Codec Configuration
- 11.1.Audio Codec Configuration
- 11.2.Video Codec Configuration
- 11.3.Configure DTMF Data Transmission
12.Phone Book Configuration
- 12.1.Managing Contact Group
- 12.2.Managing Contacts
- 12.3.Export/Import Contacts
13.Relay Setting
- 13.1.Relay Switch Setting
- 13.2.Select Speed Dial triggered Relay
- 13.3.Web Relay Setting
- 13.4.Configure White List for Door Relay
14.Door Access Schedule Management
- 14.1. Configure Door Access Schedule
  - 14.1.1.Manage Relay Schedule
  - 14.1.2.Manage Door Access Schedule
15.Door Unlock Configuration
- 15.1.Configure Access Card Format
- 15.2.Configure Access Card for Door Unlock
- 15.3.Import and Export Card Data of Access Control
- 15.4.Configure Open Relay via HTTP for Door Unlock
- 15.5.Configure Exit Button for Door Unlock
- 15.6.Configure PIN Code for Door Unlock
- 15.7.Configure Public Key for Door Unlock
16.Security
- 16.1.Tamper Alarm Setting
- 16.2. Motion Detection
  - 16.2.1.Configure Motion Detection
- 16.3.Security Notification Setting
- 16.4.Security Action Configuration
- 16.5.Voice Encryption
- 16.6.User Agent
17.Monitor and Image
- 17.1.RTSP Stream Monitoring
- 17.2.MJPEG Image Capturing
- 17.3.ONVIF
- 17.4.Live Stream
18. Logs
- 18.1.Call Logs
- 18.2.Door Logs
19.Debug
- 19.1.System Log
- 19.2.PCAP
20.Firmware Upgrade
21.Backup
22.Auto-provisioning
- 22.1.Provisioning Principle
- 22.2. Configuration Files for Auto-provisioning
- 22.3.AutoP Schedule
- 22.4.PNP Configuration
- 22.5.Static Provisioning Configuration
23.Integration with Third Party Device
- 23.1.Integration via Wiegand
- 23.2.Integration via HTTP API
- 23.3.Integration with Milestone
- 23.4.Integration with Lift Control
24.Password Modification
- 24.1.Modifying Device Web Interface Password
- 24.2.Configure Web Interface Automatic Logout
25.System Reboot&Reset
- 25.1.Reboot
- 25.2.Reset
26.Abbreviations
27. Contact us

Multi Tenant Door Phone Administrator Guide

AKUVOX SMART INTERCOM www.akuvox.com

8.Volume and Tone Configuration

Volume and tone configuration in Akuvox door phone refers to the

microphone volume, speaker volume, temper alarm volume, ringback tone

and open door tone configuration. Moreover, you can upload the tone you like

to enrich your personalized user experience.

8.1. Volume Configuration

To set up the volumes, you can set up on device web Phone > Voice interface.

Parameters Set-up:

 Mic Volume: Adjust the mic volume as needed.

 Volume Level: Control the volume of all speakers. The default is 1, the

first level of volume, the volume range is roughly 80-95, and 2 is the