Product Info

Multi Tenant Door Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
28
seconds, the default is 30 seconds.
 RPort: enable the Rport when the SIP server is in WAN (Wide Area
Network).
9.6. SNMP Setting
SNMP (Simple Network Management Protocol) is an Internet-standard
protocol for managing devices on IP networks. SNMP is widely used in
network management system to monitor network-attached devices for
conditions that may draw network administrative attention. SNMP exposes
management data in the form of variables on the managed systems, which
describe the system configuration. These variables can then be queried by
managing applications. These variables accessible via SNMP are organized
in hierarchies, which are described by Management Information Bases
(MIBs). To do the configuration on the web Network > Advanced > SNMP
interface.
Parameter Set-up：
 Active: to enable or disable SNMP feature.
 Port: to configure SNMP server’s port.
 Trusted IP: to configure allowed SNMP server address. It could be an IP
address or any valid URL domain name.
9.7. VLAN Setting
Virtual Local Area Network is a logical grouping of two or more nodes which
are not necessarily on the same physical network segment but which share
the same logical IP domain. To be specify, the purpose of VLAN is to
separate layer 2 broadcast domain. Within trunk links, the tagged packet will