Product Info

ManualsBrandsAKUVOX NETWORKS ManualsElectronicsDoor Phone

Table Of Contents

1.Product Overview
2.Change Log
3.Model Specification
4.Introduction to Configuration Menu
5.Access the Device
- 5.1.Obtain Device IP Address
- 5.2.Access the Device Setting on the Web Interface
6.Language and Time Setting
- 6.1.Language Setting
- 6.2.Time Setting
7.LED Setting
- 7.1. Infrared LED Setting
- 7.2.LED Setting on Card Reader Area
- 7.3.LED Settings on Keypad
- 7.4.LED Settings on Screen
8.Volume and Tone Configuration
- 8.1.Volume Configuration
  - 8.1.1.Open Door Tone Configuration
  - 8.1.2.Upload Tone Files
    - 8.1.2.1.Upload Ringback Tone
    - 8.1.2.2.Upload Open Door Tone
9.Network Setting
- 9.1.Network Status
- 9.2.Device Network Configuration
- 9.3.Device Deployment in Network
- 9.4.Device Local RTP configuration
- 9.5.NAT Setting
- 9.6.SNMP Setting
- 9.7.VLAN Setting
- 9.8.TR069 Setting
- 9.9.Device Web HTTP Setting
10.Intercom Call
- 10.1.IP call & IP Call Configuration
- 10.2.SIP Call &SIP Call Configuration
- 10.3.Call Session Timer
- 10.4.Configure Calling Feature
11.Audio& Video Codec Configuration
- 11.1.Audio Codec Configuration
- 11.2.Video Codec Configuration
- 11.3.Configure DTMF Data Transmission
12.Phone Book Configuration
- 12.1.Managing Contact Group
- 12.2.Managing Contacts
- 12.3.Export/Import Contacts
13.Relay Setting
- 13.1.Relay Switch Setting
- 13.2.Select Speed Dial triggered Relay
- 13.3.Web Relay Setting
- 13.4.Configure White List for Door Relay
14.Door Access Schedule Management
- 14.1. Configure Door Access Schedule
  - 14.1.1.Manage Relay Schedule
  - 14.1.2.Manage Door Access Schedule
15.Door Unlock Configuration
- 15.1.Configure Access Card Format
- 15.2.Configure Access Card for Door Unlock
- 15.3.Import and Export Card Data of Access Control
- 15.4.Configure Open Relay via HTTP for Door Unlock
- 15.5.Configure Exit Button for Door Unlock
- 15.6.Configure PIN Code for Door Unlock
- 15.7.Configure Public Key for Door Unlock
16.Security
- 16.1.Tamper Alarm Setting
- 16.2. Motion Detection
  - 16.2.1.Configure Motion Detection
- 16.3.Security Notification Setting
- 16.4.Security Action Configuration
- 16.5.Voice Encryption
- 16.6.User Agent
17.Monitor and Image
- 17.1.RTSP Stream Monitoring
- 17.2.MJPEG Image Capturing
- 17.3.ONVIF
- 17.4.Live Stream
18. Logs
- 18.1.Call Logs
- 18.2.Door Logs
19.Debug
- 19.1.System Log
- 19.2.PCAP
20.Firmware Upgrade
21.Backup
22.Auto-provisioning
- 22.1.Provisioning Principle
- 22.2. Configuration Files for Auto-provisioning
- 22.3.AutoP Schedule
- 22.4.PNP Configuration
- 22.5.Static Provisioning Configuration
23.Integration with Third Party Device
- 23.1.Integration via Wiegand
- 23.2.Integration via HTTP API
- 23.3.Integration with Milestone
- 23.4.Integration with Lift Control
24.Password Modification
- 24.1.Modifying Device Web Interface Password
- 24.2.Configure Web Interface Automatic Logout
25.System Reboot&Reset
- 25.1.Reboot
- 25.2.Reset
26.Abbreviations
27. Contact us

Multi Tenant Door Phone Administrator Guide

AKUVOX SMART INTERCOM www.akuvox.com

Parameter Set-up:

 Account: select “Account1”, “Account2” or “All account” for the DND

application.

 DND: enable or disable the DND function. DND function is disabled by

default.

 Return Code When DND: select what code should be sent to the calling

device via SIP server. 404 for “Not found”; 480 for “ Temporary

unavailable” 486 for “busy here”.

 DND On Code: turn on the DND on server using the Code obtained. The

DND on Code is 78 by default.

 DND Off Code: turn off the DND on server using the code obtained. The

DND off Code is 79 by default.

 Return Code When Refuse: select code to be sent the caller side via SIP

server when you rejected the incoming call.

10.4.2. Speed Dial Call

Speed Dial is used to quick initiate the pre-configured numbers by pressing

Dial key. To do the configuration on the web Intercom > Basic > Speed Dial

interface.