Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Language and Time Setting
- 7.LED Setting
- 8.Volume and Tone Configuration
- 9.Network Setting
- 10.Intercom Call
- 11.Audio& Video Codec Configuration
- 12.Phone Book Configuration
- 13.Relay Setting
- 14.Door Access Schedule Management
- 15.Door Unlock Configuration
- 16.Security
- 17.Monitor and Image
- 18. Logs
- 19.Debug
- 20.Firmware Upgrade
- 21.Backup
- 22.Auto-provisioning
- 23.Integration with Third Party Device
- 24.Password Modification
- 25.System Reboot&Reset
- 26.Abbreviations
- 27. Contact us
Multi Tenant Door Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
44
10.4.8. Configure Maximum Call Duration
Door phone allows you to set up the call time duration in receiving the call
from the calling device as the caller side might forget to hang up the
intercom device. When the call time duration is reached, the door phone will
terminate the calling automatically. To do this configuration on the web
Intercom > Basic interface.
Parameters Set-up:
Max Call Time: Enter the call time duration according to your need
(Ranging from 0-120 min.). The default call time duration is 5 min.
Note:
Max call time of device is also related with max call time of SIP server.
If using SIP account to make a call, please pay attention to the max
call time of SIP server. If the max call time of SIP server is shorter
than the max call time of device , the shorter one is available.
10.4.9. Maximum Dial Duration
Maximum Dial duration is consisted of Maximum dial in time duration and
the maximum dial out time. Maximum dial in time refers to the maximum
time duration before the door phone hang up the call if the call is not
answered by the door phone. In contrary, Maximum dial out time refers to the
maximum time duration before the door phone hang up itself automatically
when the call from the door phone is not answered by the intercom device
being called. To do this configuration on the web Intercom > Basic interface.