Product Info

Multi Tenant Door Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
54
not triggered until 5 seconds after you press “unlock “ tab.
 DTMF Option: select the number of DTMF digit for the door access
control (Ranging from 1-4 digits ) For example, you can select 1 digit
DTMF code or 2-digit DTMF code etc., according to your need.
 DTMF : set the 1-digt DTMF code within range from ( 0-9 and *,#).
 Multiple DTMF: set the DTMF code according to the DMTP Option setting.
For example, you are required to set the 3-digits DTMF code if DTMF
Mode is set as 3-digits.
 Relay Status: relay status is low by default which means normally
closed(NC) If the relay status is high, then it is in Normally Open
status(NO).
 Opendoor Outside/Inside Tone ： you can choose the customized
opendoor tone. To configure the tone please refer to chapter 8.1.3.2.
Note:
 Only the external devices connected to the relay switch needs to
be powered by power adapters as relay switch does not supply
power.

Note:
 If DTMF mode is set as “1 Digit DTMF” , you cannot edit DTMF
code in 2~4 Digits DTMF field. And if you set DTMF mode from
2-4 in 2~4 Digits DTMF” field, you can not edit DTMF code in 1
Digit DTMF field.
13.2.Select Speed Dial triggered Relay
This function is used to trigger a relay when you initiate the speed dial