Product Info

Multi Tenant Door Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
56
Parameter Set-up:
 Type: select among three options “Disabled” “WebRelay” and “Both”.
Select “Webrelay” to enable the web relay. Select “Disable” to disable the
web relay. Select “Both” to enable both local relay and web relay.
 IP Address: enter the we relay IP address provided by the web relay
manufacturer.
 User Name: enter the User name provided by the web relay manufacturer.
 Password: enter the password provided by the web relay
manufacturer.The passwords is authenticated via HTTP and you can
define the passwords using “http get” in Action.
 Web Relay Action: enter the specific web relay action command provided
by the web manufacturer for different actions by the web relay. Without
adding ip, username, pwd, you can fill in the HTTP command in the web
relay action, so you can configure multiple webrelays
 Web Relay Key: it can be null or enter the configured DTMF code, when
the door is unlock via DTMF code, the action command will be sent to the
web relay automatically.
 Web Relay Extension: it can be null or enter the relay extension
information, which can be a SIP Account user name of an intercom
device such as an indoor monitor, so that the specific action command
will be sent when unlock is performed on the intercom device, while this
setting is optional. And please refer to the example below:
http://admin:admin@192.168.1.2/state.xml?relayState=2.
13.4.Configure White List for Door Relay
For security, Akuvox door phone give a permission for who can unlock the
door by DTMF code. To do this configuration on the web Intercom > Relay >
Open Relay Via DTMF interface.