Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Language and Time Setting
- 7.LED Setting
- 8.Volume and Tone Configuration
- 9.Network Setting
- 10.Intercom Call
- 11.Audio& Video Codec Configuration
- 12.Phone Book Configuration
- 13.Relay Setting
- 14.Door Access Schedule Management
- 15.Door Unlock Configuration
- 16.Security
- 17.Monitor and Image
- 18. Logs
- 19.Debug
- 20.Firmware Upgrade
- 21.Backup
- 22.Auto-provisioning
- 23.Integration with Third Party Device
- 24.Password Modification
- 25.System Reboot&Reset
- 26.Abbreviations
- 27. Contact us
Multi Tenant Door Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
71
16.3.Security Notification Setting
16.3.1. Email Notification Setting
If you want to receive the security notification via email, you can configure
the Email notification on the web Intercom > Action > Email Notification
interface properly. The email notification will show as the captures.
Parameter Set-up:
Sender's email address: enter the sender’s email address from which the
email notification will be sent out.
Receiver's Email Address: enter the receiver’s email address.
SMTP Server Address:enter the SMTP server address of the sender.
SMTP User Name: enter the SMTP user name, which is usually the same
with sender’s email address.
SMTP Password:configure the password of SMTP service, which is same
with sender’s email address.
Email Subject: enter the subject of the email.