Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Language and Time Setting
- 7.LED Setting
- 8.Volume and Tone Configuration
- 9.Network Setting
- 10.Intercom Call
- 11.Audio& Video Codec Configuration
- 12.Phone Book Configuration
- 13.Relay Setting
- 14.Door Access Schedule Management
- 15.Door Unlock Configuration
- 16.Security
- 17.Monitor and Image
- 18. Logs
- 19.Debug
- 20.Firmware Upgrade
- 21.Backup
- 22.Auto-provisioning
- 23.Integration with Third Party Device
- 24.Password Modification
- 25.System Reboot&Reset
- 26.Abbreviations
- 27. Contact us
Multi Tenant Door Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
74
pre-configured action type, the notification can be sent out by the Email, FTP
notification or a SIP call. To do this configuration on web Intercom > Basic
interface.
Parameter Set-up:
No Answer Action: if the call will not be answered, it still trigger the action
event after enable this feature.
Action to execute: To choose which action to be executed after triggering.
16.4.2. Configure Action of Motion
When the Motion Detection feature is working , you can make it trigger an
action. To do this configuration on web intercom > Motion interface.
Parameter Set-up:
Action to execute: To choose which action to be executed after triggering.