Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Language and Time Setting
- 7.LED Setting
- 8.Volume and Tone Configuration
- 9.Network Setting
- 10.Intercom Call
- 11.Audio& Video Codec Configuration
- 12.Phone Book Configuration
- 13.Relay Setting
- 14.Door Access Schedule Management
- 15.Door Unlock Configuration
- 16.Security
- 17.Monitor and Image
- 18. Logs
- 19.Debug
- 20.Firmware Upgrade
- 21.Backup
- 22.Auto-provisioning
- 23.Integration with Third Party Device
- 24.Password Modification
- 25.System Reboot&Reset
- 26.Abbreviations
- 27. Contact us
Multi Tenant Door Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
75
16.4.3. Configure Action of Input
When Input interface is working , it can also trigger an action. You can do this
configuration on web Intercom > Input interface.
Parameter Set-up:
Action to execute: To choose which action to execute after triggering.
16.4.4. Configure Action of Body Temperature
When the detected wrist temperature is higher than the normal body
temperature, it will trigger the SIP/IP call if you tick the checkbox of Action
To Execute. To do this configuration on the web Intercom > Body
Temperature interface.
Parameter Set-up:
Action to execute: to choose which action to execute after triggering.